MAIWO K10635N Dual Bay USB Type C Hard Drive Enclosure HDD / SSD Duplicator for 2.5/3.5 Inch SATA Hard Drive and M.2 NVMe SSD, Support Offline Clone and Transmission Speed Up to 10Gbps, w/ 12V/3A Power

HDD/SSD duplicator. Interface: USB 3.2 Gen 2 (3.1 Gen 2). Housing material: Acrylonitrile butadiene styrene (ABS). 43.9 x 108 x 24.1 mm. Black. MAIWO K10635N type C 10Gbps to dual bay HDD/NVMe M2 SSD clone converter for 2.5 and 3.5 SATA. Key Features. Screw-less design easy to install HDD and SSD. Compatible for different kinds of HDD/SSD in the market, including M-key NVMe SSD,2.5 SATA HDD/SSD and 3.5 SATA HDD, can recognize two disks simultaneously when connecting with PC.

Support M-key NVMe SSD. Offline clone, dual way, can copy 2.5/3.5 SATA => NVMe or NVMe => 2.5/3.5 SATA, switch to control source and target disk. Four LED lights indicate clone progress 25%,50%,75% and 100%. Interface: Type C to SATA/M-key M2. Support SSD size: 2230,2242,2260 ,2280. USB speed to 10Gbps max. Support U.A.S.P, will improve speed 30% at win8 or above.

Compatible with windows, MAC and Linux. Unit size:108 x 35 x 24 mm. Clear Indicator Light. Drive Indicatior. Light Flashes when read & write, light goes off when in sleep mode.. Clone Indicator. Light flashes when cloning, light up when cloning is finished.. Step 1. Insert 2.5/3.5 SATA drive into the SATA Port, or insert M.2 NVMe SSD into the M2 port..

Step 2. Spin the silicone cork to fix the M.2 hard drive.. Step 3. Connect the adapter to your device via data cable.. Step 4. Connect the power adapter and open the power switch.. Clone Operation Steps. Step 1. Choose the clone mode. Make sure the capacity of the target drive is larger than or equal to the source drive. Connect the power adapter, open the POWER switch, the power light, lights up and then the two Drive Indicators light up.

Step 2. Long-press Clone button for 5 seconds and the Clone Indicator flashes. Press Clone button within 5 seconds to enter clone mode. Corresponding progress indicators start to flash when cloning. Indicators are on once cloning is finished. Note:. You must remove the USB-C cable from the PC for the cloning process to work. Box Contents. Package Content:.

1 x adapter. 1 x cable. 1 x power adapter. 3 x screws. 1 x manual. 1 x warranty card. Warranty. 1 Year. Features. LED indicators. Yes. Transfer rate. 10000 MB/s. Interface. USB 3.2 Gen 2 (3.1 Gen 2). Housing material. Acrylonitrile butadiene styrene (ABS). Product colour. Black. Product type. HDD/SSD duplicator. System requirements. Linux operating systems supported.

Yes. Mac compatibility. Yes. Windows operating systems supported. Yes. Weight & dimensions. Dimensions (WxDxH). 43.9 x 108 x 24.1 mm. Packaging data. Quantity per pack. 1 pc(s)